Sony CFD-C1000 - Manual (Page 32)

Troubleshooting (continued)
-2
0.
0^
a
Í0
a;
E
o
E
a;
oc
Symptom Remedy
The tiipe does not mo\ o whon vou
press iin operation button. C lose the eassette eompartnient seenreh .
Tire REC # button does not
function/The tape does not plav.
Make sure the safety tab on tlie ca.ssette is ii
place.
Make sure "TAPE" appears in the displa\’.
The tape does not erase completelv. Clean the erasing head (see page 33).
The source which was recorded on TYPE II
(high position) or TYPE IV (metal) tape using
this unit is being played. Record on TYPE I
The tape does not record. • Make sure the tape is inserted properly.
• Make sure the safety tab of the cassette is in
place.
The audio is weak/The audio • Clean the heads, pinch rollers and capstans (See
quality is poor. page 33).
• Demagnetize the heads using a demagnetizer
(see page 33).
The sound is distorted. The TYPE II (high position) or TYPE IV (metal)
tape is being used. Use TYPE I (normal) tape
only.
The timer does not operate. Make sure the time on the clock is correct.
Check to see if the AC power had been cut off.
Make sure the © (clock) indication is displayed.
The remote does not function. • Replace all the batteries in the remote with new
ones if they are weak.
• Make sure that you are pointing the remote at
the remote sensor on the player.
• Remove any obstacles in the path of the remote
and the player.
• Make sure the remote sensor is not exposed to
strong light such as direct sunlight or
fluorescent lamp light.
• Move closer to the player when using the
remote.
The player uses a built-in micro computer for its various operations. Due to change in power
supply conditions, etc., operation way sometimes become unstable. After trying the above
remedies, if the player still does not function properly, press RESET at the rear with a pointed
material. If the problem persists, please consult your nearest Sony dealer.
32 Additional Information