Sony CFD-C1000 - Manual (Page 34)

Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 6-ohm loads, both channel driven from
75 - 15,000 Hz; rated 10 W per channel-
minimum RMS power, with no more than
1 "'.i total harmonic distortion in AC
operation.
Other Specifications
CD player section
Svstt'm
Compiict disc digitiil audio system
l aser diode properties
Material: GaAIAs
Wave length; 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 pW
(This output is the value measured at a distance of
about 200 mm from the objecti\ e lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to SOO r/min (rpm) (CLV)
Number of channels
2
Frequency response
20-20,000 Hz+l/-2dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530- 1,710 kHz
Antenna
FM; Telescopic antenna
AM: Loop antenna
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 100 - 10,000 Hz -
General
Speaker
Full range: 10 em (4 in.) dia.,
(1 ohms. ci>ne Ivpe (2)
Outputs
Headphones jack (stereo minijack):
For 16-64 ohms impedance headphones
Speaker terminals: Ftir supplied 6 horns
impedance speaker
Power output (excluding US model)
13 W + 13 W (at 6 ohm, 10 "o harmcmic
distortion)
Power requirements
For CD radio cassette-corder: 120 V AC, 60 Hz
For remote controller: 3 V DC, 2 size AA (R6)
batteries
Power consumption
AC 50 W
Dimensions
Approx. 687 X 297 x 404 nim (w/h/d)
(27 '/s X11 V
4 x 16 inches) (incl. projecting parts)
Mass
Approx. 10.5 kg (23 lb. 2 oz)
Supplied accessories
Remote controller (1)
AM loop antenna (1)
Design and specifications are subject to change without
notice.
Optional accessories
Sony MDR headphone series
34 Additional Information