Sony SLV-R1000 - Manual (Page 46)

Introducing VCR Plus+
Recording Programs Using VCR Plus+
To use VCR Plus+ to record programs, all you need is the
program’s PlusCode, which you’ll find in the program listings
in your local newspaper, cable TV guide, or TV Guide
magazine.
For example, to record the following program, just use the
following procedures;
PlusCode
EXAMPLE: Q] MOVIE—Comedy (2hrs). [532921
NOTE:
• You can set the program without opening the VCR
PIUS+ menu. Refer to the display window on the
VCR.
• When you use a cable box, use Hookup 2 and set the
CABLE BOX CONTROL (See “Setting the CABLE
BOX CONTROL" on page 25). Turn the cable box
on.
1 Press VCR Plus+.
The VCR PIUS+ TIMER
SET menu appears.
Enter 53292 (the
program’s PlusCode) in
the PlusCode field.
If you make a mistake,
press TIMER CLEAR and
enter the PlusCode again.
VCR Plus*
PlusCode TAPE SPEED
[53292—1 ISP)
To select the cassette’s
recording speed (SP or
EP), press TAPE SPEED.
Unless you change the
cassette speed, SP is used.
See “Maximum recording
time of a cassette” on
page 29 for information
about cassette speeds.
VCR Plus*
PlusCode TAPE SPEED
[53292-1 [SP]
4 Press ONCE, DAILY, or WEEKLY on the Remote
Commander.
See the following chart for details of these options.
ONCE: Records scheduled programs one time
only.
WEEKLY: Records every week at the same
scheduled time.
DAILY M-F: Records Monday to Friday at the same
scheduled time.
The VCR Plus+ menu
displays the recording
information: date, program
start and stop times,
channel number, and tape
speed.
If you make a mistake,
press TIMER CLEAR, and
start from the beginning.
VCR Plus*
PiusCod* TAPE SPEED
[53292-J [SP]
RECORDING TIME
DATE START STOP CH
10/26M0N 8.00 pm 10 30 pm 52 8P
5 If you want to set another program, repeat steps
1 to 4.
6 Insert a cassette into your VCR.
Press TIMER REC (ON/OFF) to set the VCR’s
recording timer.
The VCR enters the timer recording standby mode.
Your VCR is now set up to record the programs you’ve
selected. The VCR will turn on automatically, record the
program, and then turn off until the next programmed
show is ready for broadcast.
For checking, changing, cancelling the settings, see
pages 41 and 42.
46
Basic Operations