Sony SLV-R1000 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching the F-Type Connector (not supplied)
03
CD
1
Strip 17mm (11/16") of the black polyvinyl Jacket
17 mm (11/16 inch)
2
Fold back the woven wire.
3
Strip 12 mm (1/2") of the white plastic casing,
leaving 12 mm of the center conductor.
12 mm (1/2 inch)
4
Slip the crimping ring over the cable.
5
Insert the liner conductor Into the F-type
connector shaft and push the end of the
cable into the connector as far as it will go.
6
Slide the crimping ring over this assembly.
Pinch the crimping ring with pliers to hold
the connection in place.
7
Cut the center conductor leaving 3mm (1/16") from
the end.
8 Insert the F-type connector Into VHF/UHF IN plug
on the VCR.
Additional Information
63