Sony SLV-R1000 - Manual (Page 54)

I
Quick-Timer Recording
This function provides you a shortcut to recording programs
without going through the entire timer setting procedure.
You can preset the timer up to 9 hours in units of 30 minutes.
NOTE:
• Before you begin, make sure the clock has been set,
then ensure that the timer recording function is turned
off by checking the TIMER REC (recording) indicator.
If the indicator is lit, press TIMER REC ON/OFF to
turn it off.
• When you use a Cable Box. use Hookup 2 and set the
CABLE BOX CONTROL (See "Setting the Cable Box
Control" on page 25). Turn the cable box on.
Quick-Timer Recording
If your VCR is in stop mode, perform all of the following
steps. If your VCR is currently recording, skip steps 1 to 6,
and begin with step 7.
1 Insert a cassette into your VCR.
2 Press INPUT SELECT so that the TUNER indicator
will appear in the display window.
3 Select the desired recording speed (SP or EP) by
pressing TAPE SPEED.
4 Press QUICK TIMER.
If you insert a cassette without its safety tab, your VCR
will eject the cassette.
5 Select the channel you wish to record using the
CHANNEL +/- on the VCR, or CH +/- or channel
number buttons on the Remote Commander. Press
ENTER while the channel display flashes.
6 Press QUICK TIMER again to start recording.
7 Select the recording duration by pressing QUICK
TIMER to change the duration indicator in the display
window. Each time you press QUICK TIMER, the
recording duration increases by 30 minutes.
Once recording has finished, your VCR will turn off
automatically.
To stop quick-timer recording
To stop quick-timer recording while a program is being
recorded, press TIMER REC ON/OFF.
54
Advanced Operations