Sony CDX-C8850 - Manual (Page 11)

Playing the stored program
1 Press (SHIFT).
2 Press CD (PLAY MODE) repeatedly until
*PGM” appears.
3 Press (E> (—*) repeatedly until “PGM on"
appears.
PGM on
Program Play starts.
4 Press (SHIFT).
To return to the normal playback mode, select
"PGM off" in step 3 above.
Note
"Not ready" appears in the display if a disc that
has no programed tracks is inserted.
Erasing an entire program
1 Press (SHIFT), then press ® (PLAY
MODE) for two seconds'. -
e— ruKHooe ^ \
2 Press ® (♦—) repeatedly until “DEL"
appears.
l-PGM PLL-~
e- ^ / //Ptftriwcci Ht n dfi* ^
3 Press (D (ENTER) for two seconds.
NO Bsts
The entire program is erased.
4 When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
5 Press (SHIFT).
1 Press (SHIFT), then press (T) (PLAY
MODE) for two seconds.
Adding tracks to a program
CD
7
umoot -( f /ah»i \
2 Press (33 (•.-) or (D (-*) to select the
track slot number where you want to
insert a track.
Track slot number
5 p.ra
t- Hi \ M
3 Push the SEEK/AMS control up or down
to select the track you want to insert.
4 Press (E) (ENTER) momentarily to enter
the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
5 To continue inserting tracks, repeat steps
2 through 4.
Note
Once all 24 slots have been filled, "*Mem
Full
*" appears In the display, and you cannot
insert more tracks.
6 When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
7 Press (SHIFT).
11