Installation, Precautions, How to detach and attach the front panel – Sony CDX-C8850 User Manual
Page 49: Mounting example
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
Precautions
• Do not tamper with the four holes on the upper surface of the unit. They are used for tuner adjustments
to be made only by service technicians.
• Choose the installation location carefully so that the unit will not interfere with the driver while driving,
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or
hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 60°,
How to detach and attach the front panel
Before installing the unit, detach the front panel.
To detach □
Before detaching the front panel, be sure to press
(OFF
) first. Then press
(OPEN)
to open the front panel, then
slide the front panel to the right side, and pull out the left side of the front panel.
To attach [3
place the hole 0 in the front panel onto the spindle © on the unit as illustrated, then push the left side in.
Mounting example
Installation in the dashboard