Sony CDX-C8850 - Manual (Page 31)

Displaying the disc memo name
Press ( DSPL/SA ) during CD or CD TEXT
disc playback.
CD 2
T
SCHUBERT
Each time you press ( PSPL/SA ) during CD
or CD TEXT disc playback, the item
changes as follows:
I
Elapsed playback time
I
Disc memo name
I
Track name* * *
I
Clock
___________ I
* If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
win appear in the dispiay when you piayback
a CD TEXT disc.
After if you select the desired item, the display
will be automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 25).
Erasing the disc memo
1
Press ( SOURCE) repeatedly to select CD.
2
Press ( MODE
)
repeatedly to select the CD
unit.
3
Press ( LIST ) for two seconds.
4
Press (DSPL/SA) for two seconds.
5
Rotate the dial to select the name you
want to erase.
7
Press ( LIST) for two seconds.
The unit returns to normal CD playback
mode.
Note
When the personaiized labei is erased, the original
CD TEXT information wili appear in the display.
Locating a disc by name
— List-up (CD unit with the custom fiie
function or MD unit)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling n
CD"' (page 30).
1 Press (LIST) momentarily.
The name assigned to the current disc
appears in the display.
L S T ®
As
V W V « h T/ / I I I / / .
1 SCHUBERT;
^ ' 1 1 I I I \ \
When you assign a disc memo label to a
CD TEXT disc, it takes priority over the
original CD TEXT information.
2 Press (LIST) repeatedly until you find the
desired disc.
3 Press (ENTER) to'play back the disc.
Notes
• After a disc name has been displayed for five
seconds, the display returns to normal playback
mode. To turn off the display, press ( dspl / sa ).
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, "NO Disc"
appears in the display.
• If a disc has not been assigned a custom file,
“*** * ‘*****'' appears in the display.
• If the disc information has not been read by the
unit.
"?" appears in the display. To load the disc,
first press the number button, then choose the
disc that has not been loaded.
• The information appears only in upper case.
There are also some letters which cannot be
displayed (during MD or CD TEXT disc playback).
6 Press CD (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
31