Sony CDX-C8850 - Manual (Page 9)

Changing the display item
Each time you press (DSPUSA). the item
changes as follows:
Elapsed playback time
Disc name’VArtist natne*^
Track name*'
Clock
_______ 1
•' If you inserted a non-CD TEXT disc,
“NO D.Name" or “NO T.Name“ appears in the
display.
If you play a CD TEXT disc, the artist name
appears in the display after the disc name. (Only
for CD TEXT discs with the artist name.)
After if you select the desired item, the display
will be automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings" on
page 25).
You can label CD and CD TEXT discs with a
personalized name using the disc memo
function, refer to "Labeling a CD" (page 30).
However, if you use personalized labels, they
will always take priority over the original CD
TEXT information when such information is
displayed.
Tips
• if the name of the CD TEXT disc is too long, you
can scroll it across the display by pressing
(SHIFT), then (T) (*-).
• if you want to display the original CD TEXT
information after labeling the CD TEXT disc with
a personalized name, press ( shift ) , then ®
(-*).
Automatically scrolling a disc name
— Auto Scroll
If the disc name/artist name or track name on
a CD TEXT disc exceeds 10 characters and the
Auto Scroll function is on, the disc or artist
name automatically scrolls on the display as
follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
If you press (DSPL/SA) to change the display
item, the disc or track name of the CD TEXT
disc is scrolled automatically whether you set
the function on or off.
1 During playback, press iSH iFTi.
2 Press (D (SET UP) repeatedly until
"A.Scrl" appears.
3 Press (D (—►) to select "A.Scrl on."
4 Press (SHIFT).
To cancel Auto Scroll, select "A.Scrl off" in
step 3 above.
Note
For some CD TEXT discs with extremely many
characters, the following cases may happen:
— Some of the characters are not displayed.
— Auto Scroll does not work.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down momentarily.
To locate succeeding
tracks
To locate preceding A ^
tracks
V.
Locating a specific point in a track
— Manual Search
During playback, push the SEEK/AMS
control up or down and hold.
Release when you have found the
desired point.
To search forward
To search backward
Note
If or "-T-T-i-i" appears in the display, it
means you have reached the beginning or the end
of the disc and you cannot go any further.