Sony ICF-SC1 - Manual (Page 12)

Preset Tuning
The roceix or has 10 preset pages, eacli with 30 channels;
thus the receix er can memorize a total ot 300 trequencies.
Presetting stations in the memory
When vou preset a trequoncx^ to a channel the trequencx'
step, detection mode and the DELAY setting tor each
trequencx' is memorized as well.
1 Press POWER to turn the receix er on.
2
Tune in to the frequencx' vou wish to preset.
3
It you are in the Scanning iMode, turn SQL to MIN to
pause scanning, or press SCAN to enter the Manual
Mode.
\'ou cannot preset a station when the receiver is
scanning.
4 Preset the frequencv to the preset channel of your
choice.
While holding down ENTER, press the number kev
for the page of your choice, then EXE, then the
number key for the preset channel number of your
choice, then EXE. Do not release ENTER until you
have completed presetting.
Example; presetting 128.000 MHz to preset channel 26
of page 5.
Hold down ENTER...
..then press EXE (without releasing ENTER).
vrrn-r
'PAGE! ^
DELAY
12.5k
1 innnn
AM rt_ U.tJULf MHz
The current page number will flash in the
display.
..press 5, then EXE {without releasing ENTER)...
PAGE 5y 1 1 1 1 1 1 /
nmi PRESETIl t
DELAY ", u r"
12 /k I I I I I 1 ''
AM
IJO nnn
tL U.UIJU MHz
Page 5 has been entered and the preset channel
number will flash in the display.
...then press 2, then 6 (without releasing ENTER)...
PAGE 5y 1 M 1 1 1 /
/niH7 PRESET 2IC "
DELAY
12./k I I I I I'l'T
AM
1JIJ nnn
/L U.LIUU MHz
PAGE
5
lin^
DELAY
12.5k
1 in nnn
AM IL U.UIJU MHz
Channel 26 has been entered and presetting is
complete. The displav returns to the reception
displav.
To cancel presetting input
Release ENTER.
• To change the page number and channel number input, vou can
also use the +/- kevs wlien the number is flashing in the displax’
(i.e.; while holding down ENTER).
♦If the page number flashing in the displav is already the one ot
your choice when vou hold down ENTER, vou do not need to
press the page number again; press EXE to enter.
•After the page number has been entered, the receiver will first
displav the number of the lowest unoccupied channel.
Therefore?, when vou are presetting stations the first time around
on a particular page, the receiver will automatically start from
channel number 1 and move up in order every time vou preset a
station, without having to input the channel number manually.
Notes
•The "10/0" key functions as 10 for the page number, but as 0 for
anything else. To input page number 10, press the "10/0" key. To
input channel number 10, press "1" and then "10/0".
•If there is no unoccupied preset channel on the page you have
chosen, "PRESET —" will flash in the display.
•If you preset a frequency on a channel that already has a preset
frequency, the older frequency w’ill be overwritten by the new
one.
•When you preset a frequency, the DELAY setting (see "Adjusting
scanning pause time", page 30) for the particular frequency is
memorized as well.
To change the DELAY setting for a preset frequency, first recall
the preset frequency (see "Recalling a preset channel" below),
then press PRI/DELAY for one second or longer. The new
DELAY setting will be memorized along with the preset
frequency (DELAY will turn on if it had been off, vice versa).
•You cannot preset a station you have received with Memory
Scanning, whether or not the receiver is in scanning pause.
•You cannot preset a priority channel frequency you have
received with Priority Scanning.
Recalling a preset channel
1
2
3
4
22
"PRESET 26" will flash in the display.
Press POWER to turn the receiver on.
If you are in the Scanning Mode, press SCAN to enter
the Manual Mode.
iKtfiii'i will disappear from the display.
Press PAGE, then the number key for the page
number you wish to recall, then EXE.
Press PRESET, then the number key for the preset
channel number vou wish to recall, then EXE.
23