Precautions, On batteries, On handling – Sony ICF-SC1 User Manual

Page 18: On cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Will not pause scanning on a certain frequency.

• It is dcsign.itod

< 1

SKIP froqiic'ncN' (p.igo 28).

Cannot keep the receiver on scanning pause.

• Priority Scanning is <icti\ c and the receic er receix ed the

priority channel (page 26),

• Scanning pause time is set to the 5-.sccond pause mode

(page ,

8

()).

The display is dim.

• Weak batteries.

—► Replace all batteries with new ones.

• The receiyer is being used in extremely high

temperatures or excessive humidity.

Cannot memorize a frequency

• The memorizing procedure is incorrect (page 22).

Cannot input a frequency with Direct Tuning.

• You took more than 10 seconds between the digits.
• You tried to input a frequency beyond the frequency

range of the receiver.

Precautions

• Opt-’r«ito tlio sc.inmni; recoi\vr i>niv tm recomim‘nded pifwi'r

stHircos. To use the reeeu ei t.>n AC' pow er, use only the supplied
or the rocomnrended .AC ptn\ er cfdaptor. Do not use r\nN- other
AC petw'cr ciduptor.

\'o

use tlie rcceix’er on u enr battery, use t>nl\

the reet^mmended ear battery cord. Do not use any other ear
battery eord.

• The nameplate indicatini; the operating \'e>ltage, ptiwer

consumption, ete. is Uicated at the btfttom exterior of the receiver.

• SluHild any solid object or licjuid fall into the set, remove the

batteries and ha\ e tire receivi'r checked bv qualified personnel
before operating it any further.

• Reception ma\ be difficult tfr contain noise in vehicles or in

buildings. Tr\' listening near a window.

• Certain frequencies m.w be difficult to recei\'e due to internal

spurious signals, or birdies, inherent to tlie built-in oscillakirs
used in a recei\’er. If the scanning receix’er always pauses
scanning at a certain frequence but seems to be rcceix'ing no
signal, it may be receiving a birdie. In this case, designate it a
SKIP-frequencv.

• Be sure to adjust VOL to a moderate level before turning on the

pow’er or plugging in the earphone. There will be no sound when
the receiver is scanning. Sudden reception (opening of the
squelch) mav cause unexpected loud sound and may cause
hearing damage.

• If there is lightning w'hen you are using an external antenna,

disconnect AC power immediately from the wall outlet (if
connected). Never touch the antenna during a lightning storm.

On batteries

Do not carry the batteries with coins or other metallic objects. It
can generate heat if the positive and negative terminals of the
batteries are accidentally contacted bv a metallic object.

On handling

• When carrying the receiver, do not hold it by the antenna, the

VOL control, or the SQL control.

•Do not bend or pull the antenna.
•Do not drop the receiver or expose it to mechanical shock. It may

cause a malfunction.

•Do not leave the unit in a location near heat sources, or in a place

subject to direct sunlight, excessive dust or sand, moisture, rain,
mechanical shock, or in a car with its windows closed.

•The LCD display mav become hard to see or slow^ down when

using the unit at high temperatures (above 40"C/104T) or at lovv'
temperatures (below O'C/Sl"?). At room temperature, the
display will return to its normal operating condition.

On cleaning

When the case becomes soiled, dean it with a soft cloth dampened
with a mild detergent solution. Never use abrasive cleansers or
chemical solvents, as they may mar the case.

If you have any questions or problems concerning your
scanning receiver, please consult your nearest Sony
dealer.

34

35

Advertising