Using the receiver on ac power, Using the receiver on a car battery, Notes – Sony ICF-SC1 User Manual
Page 4: Attaching/detaching the antenna, To detach the antenna, Note, Attaching/detaching the belt holder, To detach the belt holder
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the receiver on AC power
Plug in the supplied AC power-adaptor in to the DC IN
•Do not twist or crumple the AC power adaptor cord forcefully.
Do not place any heavy object on the cord.
•To disconnect the AC power cord, pull it out by the plug, not the
cord.
•When you are not using the receiver for an extended period of
time, disconnect the AC power adaptor both from the wail outlet
and the receiver.
Using the receiver on a car battery
Plug in the car battery cord (not supplied) to the EXT IN
6V jack.
For more information, consult the Operating Instructions
for the car battery cord.
Notes
•Turn off the power when plugging or unplugging the AC power
adaptor or the car battery cold fromlhe DC IN 6 V jack.
Otherwise, the power may be cut off and <X3 may appear in the
display. In this case, press POWER to turn the power on again.
The display will disappear.
•When using the receiver on batteries, unplug the AC power
adaptor or the car battery cord from the IXl IN 6 V jack on the
receiver. The receiver will not be powered by the batteries as
long^s the DC IN 6V jack is plugged in.
If you plug in the AC power adaptor or the car battery cord to
the IX IN 6 V jack, the power will automatically switch to
external power even if the batteries are installed.
•Use only the supplied/recommended AC jx>wer adaptor and car
battery cord.
^ Polarity of the plug
•The display will be lit with the backlight when you are using the
AC power adaptor or the car battery cord (see "Turning on the
light", page 32).
Attaching/detaching the
antenna
Fit the supplied helical antenna so that the projection on
the connector of the main unit fits the slot on the antenna.
Hold the antenna by the connector and turn it clockwise
until the connector clicks.
Helical
antenna
Slot
Projection
To detach the antenna
Turn the antenna counterclockwise to release the lock of
the connector.
Note
When detaching the antenna, hold the antenna by the connector.
Do not hold the antenna rod itself.
Attaching/detaching the belt
holder
Place the holder so that the projection on the holder fits
the slot on the main unit. Turn the screws clockwise with
To detach the belt holder
Turn the screws counterclockwise.