Sony ICF-SC1 - Manual (Page 7)

NOTICE -----------------------—------------------—
If you wish to listen to transmission continuously
(such as when listening to FM broadcast, TV
sound, or Weather broadcast, etc.), be sure to set
SQL to MIN so that the squelch does not close
when the signal gets weak.
Memory Scanning
Memory Scanning scans the frequencies you have preset
in the memory. (To preset a station in the memory, see
page 22). Choose one or more target pages to run Memory
Scanning.
1
Set the SQL control to MIN,
2
Press POWER to turn the receiver on.
3
Recall any preset channel (see "Recalling a preset
channel", page 23).
The preset number will appear in the display.
PAGE 5
1ШЗ
DELAY
PRESET ~tr
CLI
12.5k
1 ~in nnn
AM IL LI.UUU MHz
Press SCAN.
The receiver will enter the Memory Scanning mode.
The page numberfs) for the target page(s) will appear
in the display.
— 4^
PAK.i C
PRESET nj
DELAY И8Ш IJ J
5k
NFU tcnnnn
lJU.UUU MHz
Here, the receiver is scanning page 1.
5
Adjust the SQL control (see page 11).
6
Select the target page.
With each press of the number key, the page number
will appear and disappear alternately in the display.
PAGE 2 ::6c
ПЯШ 'fi^SET
DELAY larfA'i tc
t2.5k
NFM UC П nnn
IJU.UUU MHz
Here, you have pressed 2 and 6 (to add these pages),
and 1 (to discard the page). The receiver is currently
■ pausing scanning on preset channel number 12 of
page 6.
Notes
•The number for the current target page will flash in the display.
•When there is only one page in the display, you cannot discard
the page from the scanning target.
12 13