Replacing the fuse of the car battery cord – Sony D-SJ17CK User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Replacing the fuse of

the car battery cord

If the CD player does not operate, check the
fuse. If it is blown, replace it as follows:

Turn off the CD player and remove
the cigarette lighter plug from the
cigarette lighter socket.

2

Remove the plug end by turning it

counterclockwise.

3

Remove the defective fuse from

the plug.

4

Insert a new fuse into the plug.

5

Replace the plug end by turning it

clockwise.

Notes on the car connecting pack

• If no sound is heard or the car connecting pack is

ejected, change the direction of playback on the

car cassette deck.

• Never insert the cord end of the car connecting

pack into the cassette insertion door. Otherwise,

the cord may break or the car cassette deck may

be damaged.

• You cannot use the car connecting pack with

some car cassette deck.

• The cord should be placed so that it does not

hinder driving.

• To disconnect the cord from the CD player, pull it

out by grasping the plug. Never pull the plug out

by the cord.

• With some car cassette decks, you may hear some

rattling noise from the car connecting pack.

However, this is not a sign of malfunction.

Remove Fuse

Plug end

Cigarette lighter plug

00

fi)

&)

n

Q)

Notes

Be sure to use a fuse of the same amperage and
length as the one to be replaced. Never use a
piece of wire as a substitute for the fuse.

If the fuse is blown again after replacing it,

contact your nearest Sony dealer. In such a case,

bring the defective fuse to the dealer with you.

17

Advertising