Notes, Maintenance, To clean the casing – Sony D-SJ17CK User Manual

Page 23: To clean the headphones plug, To remove any dust or sand from the rubber packing

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

The supplied AC power adaptor is not

water resistant. To prevent shock hazard,
avoid using the player near water during
AC operation.
Cover the DC IN 4.5 V jack and d jack
with the attached rubber caps when

nothing is connected to these jacks. If the
inside of the jacks are contaminated with
water or sand, rust may develop and cause
trouble.

Notes

Since the unit is airtight, you may not be able to
open the lid when there is a sudden change in air

pressure inside the unit. This happens when the

unit is transported on a plane or moved from a

warm place to a cold place. In this case, open the

rubber cap on the DC IN 4.5 V jack.

To prevent water from leaking in, the buckle is

designed to be slightly stiff. Be careful not to

catch a fingernail on the buckle when unfastening

the lid.

Maintenance

To clean the casing

Use a soft cloth slightly moistened in water

or a mild detergent solution. Do not use
alcohol, benzine or thinner.

To clean the headphones
plug

Keep the plug of your headphones clean to
obtain optimum sound. Wipe it with a dry,
soft cloth.

To remove any dust or sand

from the rubber packing

Any sand or dust on the rubber packing will

prevent the lid from shutting tightly, and
water may leak in. Brush off the dust once in
a while.
We recommend the replacement of the
rubber packing every year which is available
optionally at an authorized Sony service
facility.

o'

23

Advertising