Sony DCR-TRV510 - Manual (Page 114)

Precautions for Use
About thd'!( ‘ing Environrtient
WS9B№
The hardware and software requirements for using PictureGear are as
follows:
n
IBM PC/AT or compatible with the following capabilities.
- Minimum 90 MHz Pentium CPU (166 MHz or faster recommended)
- Minimum 32 MB main memory (64 MB or more recommended)
- Minimum 30 MB available hard disk space (for Standard installation)
- Minimum 640 x 480 pixel Hi Color (16-bit color) display driver
capability.
□ Operating System
Microsoft Windows 95,98 or NT4.0.
About Using with Windows NT4.0
• PictureGear must be installed with a supervisory-level login user name,
such as "Administrator".
• PictureGear may require about 150 MB of real and virtual memory
combined. If PictureGear is run under Windows NT4.0 with too little
memory, a message such as "Your system is ruiming low on virtual
memory. Please close some applications." may appear. In this case, close
PictureGear immediately, login with a supervisory level user name, double
click the System icon in the Control Panel and increase the maximum size
of virtual memory with the Performance setting.
Note
To view movies with PictureGear Version 3.2 Lite, the Microsoft DirectX Media
Runtime Version 5.2 (or later) movie support library is required. If no movie support
library is present, it can be installed from the PictureGear CD-ROM. See page 10 for
details.
About Coil
When using PictureGear, the color palette of the screen should be at least
Hi Color (16-bit color) for proper display.
The display color settings are made by double clicking the Display icon in
the Windows Control Panel.