Sony DCR-TRV510 User Manual
Page 130
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using a Memory Stick Serial Port
Adapter (for Handycams)
With the Sony Memory Stick (MS) Serial Port Adapter (for Handycams)
connected to the PC, PictureGear lets you transfer images between the PC
and Memory Sticks.
Note
The Memory Sticks described here refer to those in which images have been stored by
the device with which the software was bundled (or with the devices for which the
accessory kit bundle is intended). Memory Sticks containing images stored by other
devices are not guaranteed to be compatible.
1
Turn off the PC power.
2
Connect one end of the connection cable to a PC serial port, and
the other end to the DIGITAL IN/OUT jack on the MS Serial Port
Adapter.
3
Plug the cord of the MS Serial Port Adapter into an outlet to turn
it on.
Refer to the MS Serial Port Adapter operating manual for details.
4
Turn on the PC and run PictureGear.
5
In the Setup menu, point to Connection with Other Device, and
click MS Serial Port Adapter.
The MS Serial Port Adapter Settings dialog box appears.
M S'Serial Prot Adricter Settincr5
22