Notes, When the overlap indicator appears, When start/stop mode is set to – Sony DCR-TRV510 User Manual
Page 32: Note on the bounce function, Using the fader function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Fader function
Notes
• The overlap hmction work only for tapes recorded in the DigitalS system.
• You cannot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions.
- Digital effect
- Low lux mode of PROGRAM AE (Overlap function only)
- NightShot +SI
0
W shutter
- Photo recording
When the OVERLAP indicator appears
Your camcorder automatically memorizes the image
recorded on a
tape.
As
the image
is
being memorized, the OVERLAP indicator flashes fast,
and
the playback picture is
displayed. At this stage, the picture may not be recorded clearly, depending on the tape
condition.
When START/STOP MODE is set to
You cannot use the fader function.
. or 5SEC
While using the bounce function, you cannot use the following functions:
-Exposure
-Focus
-Zoom
- Picture effect
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
- D ZOOM is set to ON in the MEl^ settings
-Wide mode
-Picture effect
- PROGRAM AE
32