Before operation, To stop copying midway, During copying – Sony DCR-TRV510 User Manual
Page 74: Lij 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Copying images recorded in the built-in
flash memory to tapes________________________
You can copy still images recorded in the built-in flash memory and record them to a
tape.
Before operation
Insert a tape for recording.
(1)
Set the POWER switch to VTR.
(2)
Using the tape transport buttons, search a point where you want to record the
desired still image. Set the tape to the playback pause mode.
(3)
Press • REC to set the tape to the recording pause mode.
(4)
Press PLAY to play back the still image you want to copy.
(5)
Press I I to start recording and press I I again to stop.
(
6
)
If you have more to copy, repeat steps 4 and 5.
1 PO W ER
■ IC AM ERAlo |^ =
O FF»
H flai" #iB
2
3
REC
LiJ
5
PAUSE
QD
•
To stop copying midway
Press ■ .
During copying
You caimot operate the following buttorts:
MEMORY PLAY, MEMORY INDEX, MEMORY DELETE, MEMORY +, and
MEMORY-.
74