Sony DCR-TRV510 - Manual (Page 82)

Resetting the date and time
The clock is set to East Coast Standard Time at the factory.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date and time.
You must reset the date and time when the lithium battery becomes dead with no
power source installed.
First, set the year, then the month, the day, the hour and then the minute.
(1) While the camcorder is in the standby mode, press MENU to display the
MENU settings.
(2) Turn the SEL/PUSH EXEC dial to select then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
( 6 ) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the MENU settings disappear. The time indicator
appears.
О
SETUP MENU « CLOCK SET
« AUTO TV ON
■ L T v INPUT
S LTR SIZE
•K DEMO UOOC
s
SETUP MENU
ta TV INPUT
В LTR SIZE
m OEMO'MOOE
9 PRETURN
SETUP MENU
Ы TCLOCK
W À0TÒ TV ON t ♦ ♦
ce TV INPUT tnSBJAN 1
в LTR SIZE « * * *
(K DEMO MOOE
? PRETURN t 1 12 00 AU
[MENU] :ENO [MENU] : END
4
Щ
* f
H H 6 1 J A N 1
t f t
1 0 9 9 OSS) 1
* * * * f f
12 00 AU
♦ t
12 00 AM
* f
d>
SETUP MENU
« a 0 t 5W on t i ♦
■a TV INPUT IH» JUL 4
Ш LTR SIZE < * 1
•K OEMO UOOE
P PRETURN * t 5 гаД] PU
-mfnruL..................................
®XJT o “6 n 5:30 oopu и TV INPUT
В LTR SIZE rc OEMO MOOE
9 PRETURN
(MENU) :ENO (MENU) :ENO
The year changes as follows:
1998 1999 2029
82
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands for noon.