Choose the dialing mode, If you aren't sure of your dialing system, Step 2: setting up the base unit (continued) – Sony SPP-A957 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting up the base unit (continued)
Notes
• Use only the supplied AC-T46 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the base unit close to the AC outlet so that you
can unplug the AC power adaptor easily.
Polarity of the plug
Tips
• If your telephone outlet is not modular, contact your
telephone service company for assistance,
• To remove the wall bracket, press the upper tab.
Modular
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
{tone or pulse).
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is
Set the switch to
Tone
T
Pulse
P
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.
10
^'
Getting Started