Preparing the battery pack, Step3 – Sony SPP-A957 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step3
Preparing the battery pack
Charge the battery pack for more than
12 hours
before you start using
your phone.
1 Slide open the battery
compartment lid of the handset.
Connect the battery connector
with correct polarity (black wire
goes on right side and red wire
goes on left).
Hook the cords, and insert the
battery pack. Then close the lid.
Place the handset on the base
unit.
You can place either side facing
up.
The CHARGE lamp lights up
when the handset is properly
seated on the charge terminals
of the baseunit. Charge the
battery pack for more than
12
hours
so that the battery is fully
charged. The CHARGE lamp
remains lit even after charging
is completed.
CHARGE lamp
continued
Getting Started