Sony IT-M10 - Manual (Page 10)

Making another call on a different line while
talking on the other
Press ( HOLD ) while talking on one line.
This line remains connected in on-hold mode.
2
3
4
Press (T jn E 1) or I ), whichever is not used.
Dial a phone number for the second party.
Press CCON^ (conference).
Now you can talk to both parties.
To disconnect the line(s)
Replace the handset in the cradle to disconnect both lines.
To disconnect only line 1, press ( LINE 2). On the other hand, to
disconnect only line
2, press ( LINE 1 ').
To on-hold the line(s) while using a three-way coference
Press ( HOLD ) once so that both lines are put in the on-hold mode.
To cancel the on-hold mode for the both lines, press (fCONF).
To cancel the on-hold mode for only one line, press ( LINE 1) or ( LINE 2),
for the line you want to talk on. (The other line remains connected in the
on-hold mode. Press ( CONE ) to talk on both lines again.)
?
During a three-way conference, do not press (FLASH
service." Otherwise, both lines will be disconnected. I to use "call waiting
Receiving another call on a different line while
talking on the other
1 Press ( FIOLD ) while talking on one line.
2 Press C line 1 ) or ( line 2), to which another call is coming.
3 Press (CONF) (conference).