Important safety instructions – Sony IT-M10 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

IMPORTANT SAFETY

INSTRUCTIONS

When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Disconnect this product from the telephone line before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.

4. Do not use this product near water, for example, near a bath tub,

wash bowl, kitchen sink, or laundry tub, in a vvet basement, or near a
swimming pool.

5. Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided

for ventilation. To protect it from overheating, these openings must
not be blocked or covered. The openings should never be blocked by
placing the product on the bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in installation
unless proper ventilation is provided.

7. Do not overload wall outlets and extension cords as this can result in

the risk of fire or electric shock.

8., Never push objects of any kind into this product through cabinet slots

as they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock. Never spill liquid of any
kind on the product.

9. To reduce the risk of electric sock, do not disassemble this product,

but take it to a qualified service personnel when some service or
repair work is required. Opening or removing covers may expose you

to dangerous voltages or other risks. Incorrect reassembly can cause

electric shock when the appliance is subsequently used.

Advertising