Making a speed dialing call, To change a stored number, If you use a private branch exchange (pbx) – Sony IT-M10 User Manual
Page 9: Having a three-way conference
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a speed dialing call
1
2
3
4
Press (
LINE 1 ) or ( LINE 2) to
select the line.
Pick up the handset.
Press (SPEED DIAL).
Press the desired speed dialing number (dialing key 0 to 9).
The phone number stored in the number will be dialed.
To change a stored number
Store a new number as described above, and the old number will be
erased.
If you use a Private Branch Exchange (PBX)
You need to dial a digit (such as 9) to access an outside line before you
dial the phone number. To store the phone number:
1
Enter the outside line access digit.
2
Press C
REDIAL/PAUSE)
to enter a pause (to allow the phone time to
the access outside line).
3
Enter the phone number you wish to store.
Tip
Use the supplied directory label to write down the names and numbers you have
stored in the speed dialing numbers and attach the label to the telephone.
Having a three-way conference
You can carry on a three-way conference using line 1 and line 2 at the
same time.
and indicator