Checking the recorded picture, To stop playback, To go back to the last recorded point (end search) – Sony DCR-PC1 User Manual
Page 20: Note on edit search function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking the recorded picture
Using EDIT SEARCH, you can review the last recorded scene or check the recorded
picture on the LCD screen.
(1)
Press OPEN and open the LCD panel.
(2)
While pressing the small green button on the POWER switch, set it to CAMERA.
(3)
Press the -/@ side of EDIT SEARCH momentarily; the last few seconds of the
recorded portion play back
(Ret Review).
Hold down the -/© side of EDIT SEARCH until the camcorder goes back to the
scene you want. The last recorded portion is played back. To go forward, hold down
the + side
(Edit Search).
END SEARCH
To Stop playback
Release EDIT SEARCH.
To go back to the last recorded point (END SEARCH)
Press END SEARCH. The last recorded point is played back for about 5 seconds and
stops. Note that this function does hot work once you eject the tape without cassette
memory after you recorded in the tape. If there is a blank portion in the recorded
portion, the End Searh may not function correctly.
Note on EDIT SEARCH function
Release EDIT SEARCH once, and press the -/© (or +) side of EDIT SEARCH when
changing the-playing direction. The direction may not change properly if pressing EDIT
SEARCH soon after releasing the button.