Recording still pictures successively, To cancel the flash motion function, Notes on the flash motion function – Sony DCR-PC1 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording still pictures successively
Using the flash motion function, you can record still pietures successively at constant
intervals. The sound is recorded normally.
(1)
While the camcorder is in Standby mode or recording mode, press DIGITAL
EFFECT and turn the control dial until the FLASH indicator flashes.
(2)
Press the control dial.
The FLASH indicator lights up and the flash motion bars appear.
(3) Turn the control dial to adjust the interval of flash motion. The intervals increase
with the number of the flash motion bars.
[a]
normal recording
[b]
flash motion recording
[a]
[b]
To cancel the flash motion function
Press DIGITAL EFFECT.
Notes on the flash motion function
• You cannot use the following functions during the flash motion recording.
- Functions using the FADER button
- Low Lux mode of PROGRAM AE
- Functions using the PHOTO button
• When you set the POWER switch to OFF, the flash motion function will be cancelled
automatically.