Setting a beep for incoming messages, Selecting the ringer mode – Sony SPP-A5000 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparing the answering machine
Setting a beep for incoming messages
You can set the phone to beep and alert you of recorded incoming
messages.
To turn on the beep, set the AUDIBLE IND/ANN ONLY
switch to AUDIBLE IND ON.
Selecting the ringer mode
The RINGER SELECT switch allows you to vary the number of rings
before the phone answers to take a message. There are three modes,
3,5, and TS. Normally, set it to TS (Toll Saver).
Mode
Useful when
How the phone works
3
You are at home.
The phone rings three times and then answers the
call.
5
You are at home.
The phone rings Eve times and then answers the
call.
TS
(Toll saver)
You want to know if any
new messages have been
received away from home.
If any new messages have been recorded, the
phone answers after three rings. If no new
messages are recorded, it answers after Eve rings.
When you call from a pushbutton phone and hear
more than three rings, you know that there are no
new messages. If you hang up at this point before
the phone answers, you can save the toll for the
call.
38
Using as a telephone answering machine
~ i£ -
‘
>r
-I, vr