Using a crt or projector – Sony PCG-808 User Manual
Page 103
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Customizing Your Notebook Computer
Using a CRT or Projector
When you select CRT/Projector as the display mode, you can make
additional settings, described as follows:
1
After selecting CRT/Projector as the type of external display (step 6
on page 90), click Advanced Settings.
2
Click the External Display Options tab.
3
Select the following options:
External Display Device:
CRT
Projector
Monitor Settings:
Connects with the external computer display.
Connects with the projector.
Independent
Display Timing
Projector Settings:
Click to place a checkmark when you wantto set
the resolution and refresh rate differently from
the computer's LCD. To change the resolution
and refresh rate, see thenotes to step 6 on
page 90.
-Type.
4
Click OK.
Select the projector's resolution from the drop
down box.
^ You cannot select Independent Display Timing when the display is set to True Color (24 bit).