Sony PCG-808 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your Notebook Computer
2
Remove the PC card slot protector.
When you use a Type III PC card, you need to remove both the top
and bottom PC card slot protectors.
Insert the PC card into the PC card slot, front label facing up. Gently
push the card into the slot until the card is fixed into the connector.
The release button comes out.
^ Do not force a card into the slot. It may damage the connector pins. If you have difficulty
inserting a card, check that you are inserting the card with the correct orientation. See the
manual that came with your PC card for more information on use.
To remove a PC card
1
Close any applications that are using the PC card.
2
Click the PC card icon in the taskbar and close the card.
3
Pull the PC card release button up and press it in toward the
computer.
4
Gently grasp the card and pull it out.
5
Insert the PC card slot protector back into the empty slot.