Sony PCG-808 User Manual

Page 114

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

VAIO Notebook Computer User Guide

When I click an application icon a message appears, such as "You must insert

the application CD into your CD-ROM drive ", and the software does not start

Some titles require specific files that are located on the application’s
CD-ROM disc. Insert the disc and try starting the program again.

Make sure you place the disc in the tray with the label side facing up.

My floppy disk drive cannot write to a diskette

The diskette is write-protected. Disable the write-protect feature or
use a diskette that is not write-protected.

Check that the diskette is properly inserted into the floppy disk drive.

My speakers have no sound

□ The built-in speakers are turned off. Press Fn+F3 to turn on the

speakers.

□ The speaker volume is turned to the minimum. Press Fn-i-F4, and

then press

t

or ^ to increase the volume.

If your computer is powered by batteries, check that the battery packs
are inserted properly and that they are charged.

If you are using an application that has its own volume control, check

that the volume is turned up.

Check the volume controls in Windows 98.

If you connect external speakers, check that the speakers are properly
connected and the volume is turned up. If the speakers have a mute
button, make sure it is off. If the speakers are powered by batteries,
check that the batteries are inserted properly and that they are

charged.

If you have connected a headphone or an audio cable to the
Headphone connector, disconnect the cable.

If the CD-ROM drive is in the docking station’s drive bay, you cannot
hear sound from your computer’s built-in speakers.

When I press Fn+F3,1 see the message "Sound Disabled"

Click the System icon in the Control Panel. Change the settings under
Device Manager so that sound is enabled.

My modem doesn't work

Check that the phone line is plugged into the line jack. See

“Connecting a Phone Line” on page 48 for details.

Check that the phone line is working. You can check the line by
plugging in an ordinary phone and listening for a dial tone.

Advertising