Sony STR-DB930 - Manual (Page 29)

M DIMMER button
Press repeatedly to adjust the brightness of the display,
mi DISPLAY button
Press repeatedly to change the information on the
display window as follows:
I-----------------------------
Index name of the component or the preset station’*
FUNCTION button indication or frequency*’
Sound field applied to the program source
I___________
* Imkx namt' apih'ars onl}/ when i/ou have assigned one to the
component or preset station (see pa^e 48). Index name does not
appear when onlp blank spaces haze been entered, or it is the
same as the function button.
** frequency appears only when the tuner is selected.
j Use the SOUND FIELD buttons to enjoy surround
sound. For details, see "Enjoying Surround Sound"
starting from page 31.
A.F.D. button / indicator
Press to set the receiver to automatically detect the
type of audio signal being input and perform proper
decoding (if necessary).
MODE button / indicator
Press to activate the sound field selection mode (page
32).
• Sound fields are not compatible with 96 kHz digital audio
signals.
2CH button / indicator
Press to output sound from only the front (left and
right) speakers.
I MULTI CHANNEL DECODING indicator
This indicator lights when the unit is decoding signals
recorded in a multi channel format.
H BASS BOOST button
Press to increase the bass of the front speakers. The
BASS BOOST indicator lights up when the function is
turned on.
• The bass booster is not compatible with 96 kHz digital
audio signals.
• The bass boost does not work with the HEADPHONE
THEATER sound field or when 5.1CH INPUT is selected.
[li EQUALIZER button
Press to turn the equalizer on or off. The EQUALIZER
indicator lights when the equalizer is turned on.
When you adjust the equalizer using the EQ
parameters (page 40) the settings are stored automati­
cally and can be reproduced whenever you turn on the
equalizer.
• The equalizer is not compatible with 96 kHz digital audio
signals.
• The equalizer does not work with the HEADPHONE
THEATER sound field or when 5.1CH INPUT is selected.
When you want to listen to an analog source without any
digital processing
Do the following to bypass the sound field, equalization, and
bass booster circuits.
1 Press BASS BOOST to turn off the BASS BOOST indicator.
2 Press EQUALIZER to turn off the EQUALIZER indicator.
3 Press 2CH.
The result will be a sound that is highly faithful to the program
I
TEST TONE button
Press to output the test tone (see page 22).
I The following buttons operate the built-in tuner. For
details, see "Receiving Broadcasts" starting from page
43.
PRESET TUNING +/- buttons
Scans all preset stations.
SHIFT button
Selects a memory page for preset stations.
fti
Д
vt
Ш
3
a
OP
b
>
3
V
о
•0
Ф
FM/AM button
Selects the FM or AM band.
29