Connections for playback, Connecting to a tv without audio/video input jades – Sony CCD-TR700 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections for Playback
You can use this camcorder as a VCR by connecting to your TV for playback. There are two ways to
connect your camcorder.
• Connecting to a TV with Video/Audio input jacks or a VCR
• Cormecting to a TV without Video/Audio input jacks
Connecting to a TV with Video/Audio input Jacks or a VCR
Connect the camcorder to your TV by using the supplied connecting cable. Set the TV/VCR selector to
VCR on the TV. When connecting the camcorder to VCR, set the input selector on the VCR to LINE.
If you are going to connect the camcorder using the S video cable [a], you do not need to connect the
yellow (video) plug of the A/V connecting cable [b].
If your TV or VCR is a monaural type, connect only the white plug for audio on both the camcorder and
the TV or the VCR. With this connection, the sound is monaural.
Connecting to a TV without Audio/Video Input Jades
Connect the camcorder to the TV by using the supplied RFU adaptor. Set the channel selector on the RFU
adaptor to 3CH or 4CH whichever is not used in your area. Turn on the TV and select the 0 position.
Tune the TV so that you can get picture and sound from the camcoder.
□_______
AERIAL
0
J