Note on the edit mode, Note on the display function, Recording from a tv or vcr – Sony CCD-TR700 User Manual
Page 41: To stop recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note on the EDIT mode
When you set EDIT to ON in the menu system, you can keep picture deterioration resulting Iron editing
to a minimum. However, when you edit or copy to anothre VCR, avoid using the edited tape for
multiple generations of editing. After editing, be sure to set EDIT to OFF.
Note on the DISPLAY function
If you have displayed the viewfinder screen indicators on the TV, erase the indicators by pressing
DISPLAY on the Remote Commander so that they will not be superimposed on the edited tape.
Recording from a TV or VCR
You can record a tape from another VCR or a TV program from a TV that has video/audio outputs.
Connect the camcorder to the TV or VCR.
(1)
Set the POWER switch to VTR.
(2)
Slide REC to the direction of the arrow at the point where you
want to start recording. In recording and recording pause mode, S VIDEO and VIDEO/AUDIO jacks
automatically work as output jacks.
^»<1—.S-VIDEOOUT
42^^13
VIDEO OUT
I
Signal flow
AUDIO OUT
CXJT
©S-VIDEO
® VIDEO
0L-)
. AUDIO
If your TV or VCR is a monaural type, cormect only the white plug for audio on both the camcorder and
the TV or VCR.
If you are going to connect the camcorder using the S video cable
[a],
you do not need to connect the
yellow (video) plug of the A/V connecting cable
[bj.
To Check the Picture from a TV or VCR before Recording
Press PAUSE after sliding REC. You can check the picture in the viewfinder.
To Stop Recording
Press □.