Getting started, Charging and installing the battery pack, Charging the battery pack – Sony CCD-TR700 User Manual
Page 6: Charging time, Battery life
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Charging and Installing the Battery Pack
Before using your camcorder, you first need to charge and install the supplied NP-66 battery pack. To
charge the battery pack, use the supplied AC-V35/V35A AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(1) Connect the power cord to a wall outlet.
(2)
Align the right side of the battery with the line on the AC power adaptor, then slide the battery pack
in the direction of the arrow.
(3)
Set the selector to CHARGE. Charging begins.
When charging is completed, the CHARGE lamp goes out. Set the selector to the center position and
unplug the unit from the wall outlet. Then remove the battery and install it on the camcorder.
To stop charging, set the selector to the center position.
Charging time
Battery pack
NP-66
(Supplied)
NP-80
NP-80D
NP-77H
NP-66H
NP-60D
NP-55H
Charging Time'*
80
155
140
100
75
70
• Approximate charging time to charge an empty battery pack using the AC-35V/V35A (Lower
temperatures require a longer charging time).
Battery Life
Battery pack
NP-66
(Supplied)
NP-80
NP-80D
NP-77H
NP-66H
NP-60D
NP-55H
Typical Recording
Time'**
40
70
70
50
30
30
Continuous
Recording Time***
70
125
125
90
60
55
** Approximate minutes when recording while you repeat recording start/stop on zooming and
tunring the power on/off. The actual battery life may be shorter.
*** Approximate continuous recording time indoors.