Canceling the zero mem, Note on the recorded picture, Т-ш) – Sony CCD-TR700 User Manual
Page 33: Г7-т-ш)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Use the tape counter. When the RC time cord appears in the display window, press COUNTER/TIME
CODE to display the tape counter.
(1)
While looking in the viewfinder in Standby mode, ke№ pressing the + or - side of EDIT5EARCH and
release the button where you want to end the insertion
[bj. (2)
Press COUNTER RESET to set the
counter to zero. (3) While looking in the viewfinder, kera pressing the - side of EDITSEARCH and
release the button where you want to start the insertion
[a]. (4)
Press ZERO MEM to stop recording of
insert at the counter's zero point. (5) Press START/STOP. Insert recording begins. The insert recording
stops automatically at the counter zero point.
Л
+EDITSEARCH-®
(0-Т-Ш)
3 +EDITSEARCH-®
Г7-Т-Ш)
b
^ COUNTER
A
Г)
Canceling the ZERO MEM
Press ZERO MEM again. The ZERO MEM indicator disappears.
Note on the recorded picture
The picture may be distorted at the ending point when played back.
33