Editing onto another tape, Before editing, Starting editing – Sony CCD-TR700 User Manual
Page 40: To edit more scenes, To stop editing momentarily, To stop editing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto Another Tape
You can create your own video programme by editing with any other
Q
8 mm,
Hi@
Hi8, WIS VHS,
SWJS
S-VHS, VIKB VHSC, SVn^ S-VHSC, ID Betamax or aaa«m ED Betamax VCR that has audio/video
inputs.
Before Editing
Connect the camcorder to the VCR using the A/V connecting cable (supplied), (p.23).
Set the input selector on the VCR to LINE, if available. Note that the data code of that tape is erased.
(1)
Set the POWER switch to VTR.
(2)
Set EDIT to ON in the menu system (p.31).
If your VCR is a monaural type, cotmect only the white plug for audio on both the camcorder and VCR.
Starting Editing
(1)
Insert a blank tape (or a tape you want to record over) into the VCR. And insert your recorded tape
into the camcorder.
(2)
Play back the recorded tape on the camcorder until you locate the point where
you want to start editing, then set the camcorder in the playback pause mode.
(3)
On the VCR, locate the
recording start point and set the VCR in the recording pause mode.
(4)
Press
II
on the camcorder and
VCR simultaneously to start editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Stop Editing Momentarily
Press
II
on the VCR.
To Stop Editing
Press □ on both the camcorder and the VCR.
Use of the EDITSEARCH button
You can play back the tape in normal/reverse direction by keep pressing EDITSEARCH during playback
pause mode. You can al^ play back still pictures successively at specific intervals by pressing
EDITSEARCH intermittently.