Recording from a microphone – Sony MZ-R50 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
cannot pause manuallv durinj;
synchro-recording.
•Wl^en there is no sound from the player tor
more than 3 seconds during svnchnv
recording, the recorder goes into the
standby mode automatically. When the
siHind comes from the player again, the
recorder resumes synchro-recording. U the
recorder is kept in the standby mode tor .3
minutes or longer, the recorder stops
automatically.
Notes
•Do not switch SYNCHRO REC after step 2.
Recording may not be done properly.
•When recording in monaural, follow steps 1
and 2 of "Recording in monaural for double
the normal recording time" (page 13) before
synchro-recording .
Recording from a
microphone
Connect a stereo microphone (ECM-717,
ECM-MS907, ECM-MS957, etc.; not
supplied) to the MIC (PLUG IN POWER)
Select the sensitivity with MIC SENS
(at the bottom of the recorder).
Usually, set it to HIGH. When
recording loud sounds such as a live
concert, set it to LOW.
Insert a recordable MD and start
recording.
Press and slide REC to the right.
"REC" lights up and recording starts.
For other operations, see "Recording
an MD right away! " (page 6).
Note
To record from a microphone, you must first
disconnect any digital source. If connected,
the recorder will not switch to microphone
input.