Sony MZ-R50 - Manual (Page 22)

Adding a track mark
You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
1 2.3 4
4 Track marking
1,2 3 4 5
Track numbers increase
I While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
"MARK ON" appears in the display,
and a track mark is added. The track
number will increase by one.
To add track marks while
recording
Press T MARK on the recorder or TRACK
MARK on the remote control.
Note
TRACK MARK on the remote control does
not function during playback.
Erasing a track mark
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
1 2 ■3- 4
Erase a track mark
Track numbers decrease
I I
mark you want to erase, press II to
pause.
2
Find the track mark by pressing \«
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
3
Press T MARK to erase the mark.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
'i'
When you erase a track mark, the date, time,
and name assigned to the mark are also
erased.