On the recorder, Reci, U u • u u – Sony MZ-R50 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
While observing the level meter in
the displav, adjust the recording level
bv pressing (+) or (-).
Set the level so that it hits the seventh
indicator trom the bottom at
maximum input level.
Level meter
■□□□□oaaaac]
<^1
■RECi
\ \ ' I / / /
^ ''ri n. n n
u u • u u
Volume decreases increases
Note
Adjust the recording level while the
recorder is in standby mode. You
cannot adjust it while recording.
Press II again to start recording.
Checking the remaining
time or the recording
position
On the recorder
DISPLAY
REC
indicator
stop mode. Each time you press the
button, the display changes as
follows.
Position pointer (shows the
current location on the MD)
To stop recording, press M.
The recording level control is switched back
to automatic control.
When you record with microphone input,
select the sensitivity with MIC SENS (page
12
).
i---- 1
1----1
n n . n n
u u • u u
o
0
While recording
o
o
Elapsed time
Track number
Remaining time for
Track number
recording
Current time"
Current date"
"Appears only when the clock is set.