Accessories, Ttl remote cords sc-12 and sc-23, Sensor remote cord sc-13 – Nikon SB 11 User Manual
Page 29: Sync cord sc-15, Dc unit sd-7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
— ACCESSORIES
TTL Remote Cords SC-12 and SC-23
The SC-12 is for the Nikon F3-series cameras; the SC-23
is for the Nikon FA, FE2, F-301/N2000 and FG cameras.
Connecting the SB-11 and an appropriate camera with
SC-12 or SC-23 provides TTL control of the flash expo
sure. Automatic switchover of shutter speed to a proper
flash sync speed and a ready-light indication in the
camera's viewfinder are also provided.
Sensor Remote Cord SC-13
The SC-13 is used to mount the SB-ll's Sensor Unit SU-2
directly on a camera's ISO-type accessory shoe lor auto
matic (but not TTL), off-camera operation. With the FA,
FE2, FE, FM2, F-301/N2000, FG, FG-20, or EM camera,
or with the F3-series camera via the AS-4 coupler, a
ready-light indication is provided in the camera's view
finder. Except for the FM2, the automatic switchover of
shutter speed to a proper flash sync speed is also pro
vided.
Sync Cord SC-15
A coiled cord over one meter in length, the SC-15 screws
into the camera's sync terminal and allows the SB-11 to
be detached from its bracket and used off-camera.
DC Unit SD-7
The Nikon DC Unit SD-7 is an external power source
which can be used with the Nikon Speedlights SB-11 and
SB-14. This unit uses six C-type batteries of either the
22