Nikon SB 11 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• If your SB-11 has not been used
for a long time, its recycling time
may
be
longer.
To
maintain
the
built-in
condenser
in
peak
condi
tion, thereby enabling
you to use
the SB-11 for many years, fire the
flash
unit
a
few
times
every
month. After firing, wait until the
ready-light
lights,
then
turn
off
the power switch, remove the bat
teries,
and
store
the
SB-11
in
a
suitable
location.
This
will
pre
vent
the
condenser
from
deterio
rating.
Keep the flash unit away from salt
water and out of the rain.
Never
attempt
to
disassemble
or
repair
the
flash
yourself.
These
delicate
procedures
should
be
left
to an authorized service facility.
25