Load the batteries, Install the battery clip, 0^ close the battery chamber – Nikon SB 11 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Load the batteries.
Insert eight AA-type penlight
batteries following the + and -
symbols on the inside of the battery
clip.
Install the battery clip.
Insert the battery clip into the
battery chamber. Make sure the ter
minal end goes in first. Then line up
the V-shaped notch on the end of the
clip with the white dot on the rim of
the battery chamber. Push the clip
until it drops into the fully seated
position.
0^ Close the battery
chamber.
Screw the battery lid back into place.
Advertising