0^ secure the bracket mounting adapter, Basic operation – Nikon SB 11 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
Open the battery
* chamber.
Unscrew the lid @ at the base of the
handle and remove the battery clip.
2, Attach the bracket
mounting adapter ® to
the speedlight s handle
First, use the screwdriver provided
to loosen the two screws on the
bracket mounting adapter. Then,
slip the adapter onto the speedlight's
handle and slide it to,the desired
position. Orient the adapter so that
its flat side is in the same plane as
the speedlight's exposure calculator
dial ©. Make sure the locking wheel
@ is facing toward the rear of the
speedlight.
0^ Secure the bracket
mounting adapter.
Tighten the screws to secure the
adapter into place.