Nikon Zoom-Nikkor 35-70mm f - Manual (Page 14)

RECOMMENDED FOCUSING SCREENS
Various interchangeable focusing screens are available for F3- and F2-series
cameras to suit any type of lens or picture-taking situation. Those which are
recommended for use with your lens are listed below. For screens used with
Nikon cameras other than F3- and F2-series cameras (e.g., Nikon FA, FE2, FM2
and FE), refer to the column tor F3-series cameras. For the K2, B2 and E2
focusing screens, refer to the columns on the K, B and E screens, respectively.
For details, also refer to the specific focusing screen's instruction sheet.
C am era
' •
Screen A/L B
c
D
E G1G2G3G4HI H2H3H4J K/P M R T
u
F3
@ ©
©
© © ©
©
F2
@
©
© © © ©
■ When the Teleconverter TC-201 or TC-200 is attached to this lens, use the
following table:
r
— — Screen
C am era
A/L
B
c D E Gl G2G3G4HI H2H3H4 J K/P M R T u
F3 m © © m m m
F2 m © © m m m
■ When the Teleconverter TC-14A is attached to this lens, use the following
table:
A/L B c
D E
Gl G2G3G4HI H2H3H4J K/P R T U
F3 ® © @ © m © m
F2 m © © © m ©
® = Excellent focusing
® = Acceptable focusing
The split-image rangefinder, microprism or cross-hair area is dim.
Focus on the surrounding matte area.
Blank means not usable.
Note: The Teleconverters TC-301, TC-300, TC-14B and TC-14 cannot be used
with this lens.
VARIABLE APERTURE
As the lens is zoomed out from 35mm to 70mm, the maximum aperture de­
creases approx. 5/6 of an f/stop. The two aperture indexes engraved on the
chrome mounting ring indicate the difference: the green index is for use at the
35mm setting, while the brown one is for the 70mm setting. For intermediate
focal length settings, align the aperture ring between the two indexes. The
relationship between the focal length and the maximum aperture is shown in
Diagram t. When this zoom lens is used with cameras having through-fhe-lens