Canon A100 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The On / Off setting of the LCD monitor dis-
piay mode is memorized when the camera is
turned off. When the camera is turned on
again it assumes the last mode. However,
when the LCD monitor is turned on and the
“Change the Batteries” message appears, the
LCD monitor may not automatically turn on
the next time the camera is started.
When the LCD monitor is set to On (no
information display) or Off, shooting informa
tion appears for approximately 6 seconds
when you take any of the following actions.
- The power is turned on.
- TheSET,DISP,ra/^|f8/.g?, ^,Ql,/0
or
buttonTs pressed.
- The camera settings are changed.
- The Set up menu is closed.
- When the shutter button is pressed and
shooting is finished (only when LCD
monitor is on).
Setting the Shooting mode to El or IQ
turns the LCD monitor on regardless of
whether it is set to On or Off.
29