Press the ^ button to turn the camera power on – Canon A100 User Manual
Page 96
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Press the ^ button to turn the
camera power on.
If the printer is correctly connected, the O
icon wiii appear on the LCD monitor.
o
OWhen
disconnecting
the
cabie
from
the
camera’s Digitai terminai, be sure to hoid the
connector at its sides and puil it straight out.
O Movies cannot be piayed back or the lan
guage cannot be set with
SET + MENU
but
ton when the camera is connected to a
printer.
O When the printer is disconnected, the
m
symbol will disappear from the LCD monitor
and the camera will revert to standard
replay mode.
Advertising
This manual is related to the following products: