Press e) or 0 button to select white, Balance, Press the set button – Canon A100 User Manual
Page 75: Wb setting the white balance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WB Setting the White Balance
1
When the white balance is set to match the light
source, the camera can reproduce colors more
accurately.
Auto
The camera sets the white
balance automatically according
to shooting conditions.
©
Daylight
Use when shooting outdoors in
sunlight on a clear day.
o
Cloudy
Use when shooting outdoors and the
sunlight is not enough such as under
cloudy skies, in shade or at dusk.
o
Tungsten
For recording under tungsten
and bulb-type 3-wavelength
fluorescent lighting.
Fluorescent
For recording under warm-white,
cool-white or warm-white (3-
wavelength) fluorescent lighting.
Fluorescent H
For recording under daylight
fluorescent, or daylight
fluorescent-type (3-wavelength)
fluorescent lighting.
Press the
H
/
WB
/ •© button (several
times) until the white balance setting
screen appears.
<!№■ #
Press
E)
or
0
button to select white
balance.
•
If the LCD monitor is on, you can check the
resuits by viewing the image on the LCD
monitor.
•
A shot can be taken immediately by
pressing the shutter button. The menu wiii
reappear after the shot, aliowing you to
adjust the setting.
Press the SET button.
The white baiance cannot be set when ^
(sepia) or
(B / W) photo effect is selected.
53