Resetting the file number [eb3bbb), In the [rec.] menu, select ^ (file no. reset), Resetting the file number – Canon A100 User Manual
Page 78: 3bbb)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the File Number [
eb
3BBB)
Select the set up method for the file number.
The camera resets the file number to 100-
0001 each time you insert a new (unused)
On CF card. If you insert a card that already
contains some images, numbering resumes
from the next available number.
The camera remembers the last tile number,
Off and starts numbering from the next number
when you insert a new CF card.
In the [Rec.] menu, select ^ (File
No. Reset).
See “Selecting Menus and Settings” (p. 36).
Press e> or O button to select [On]
or [Off] and press the MENU button.
O
The [Off] setting helps ensure that file num
bers remain unique over multiple CF cards.
This is useful if you are planning to down
load images from the cards to your computer,
since it helps avoid accidental ovenwrites that
may occur if filenames are duplicated.
About file numbering...
O Image files are assigned numerical file
names over the range 0001 to 9900. The
camera stores these files into folders, which
are assigned folder numbers from 100 to 996
(except that numbers ending in 99 are not
used).
O In most cases the camera stores exactly 100
files into each folder. Because the camera
cannot switch to a new folder when taking
shots
in
or
^
mode,
however,
some folders may have more than 100 im
ages.
56