Footage counter – Canon DS-8 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
in
Depress
the
shutter
release
button,
while
pressing
the
film
* ^ guide reiease pin (the fiim guide is in open condition), and check
to see that the top and bottom film loops are uniform. Three to four
centimeters of film feed is sufficient.
11 Put the side cover back on, turn the film side cover iatch and
‘ ‘ flip it down.
1 O Depress the shutter reiease button and feed the film until the
footage counter moves from to "0”. Start shooting from
“0” position.
■ The fiim guides open when the fiim guide reiease pin is pressed
and cióse when the shutter reiease button is depressed. It is con
venient for correcting an improperly loaded film.
Footage Counter
As shooting proceeds, the footage counter indicates the iength of
exposed
fiim
in
feet.
The
to
"0”
and'
‘100"
to
portions
are
both lengths for leaders. The footage counter resets automatically
when the side cover is opened.